Changes between Version 11 and Version 12 of WikiStart

Timestamp:

2010-07-01 22:36:20 (14 years ago)

Author:

woodsby

Comment:

--

WikiStart

@@ -6 +6 @@
 The ActiveRFID hardware, formerly known as cheaperRFID, can be purchased from Cliste Electronics at [http://cliste.sailwhatcom.com].  I recommend purchasing the USB RSSI receiver, as eventually I intend to provide signal strength based events; and the difference in cost is negligible. I also recommend purchasing transmitters without any sealant, especially if you are purchasing multiple 40m transmitters.  It's much easier to identify each transmitter if you pull all the batteries, and put them back in, one transmitter at a time.  It's easy enough to seal them yourself using plastic dip or liquid electrical tape.
 
-== Initial Setup ==
+== First Time Installations ==
 Before getting started setting up the plugin, a little effort is required to get the USB Receiver supported by Vera.
 
@@ -18 +18 @@
 }}}
 
-== Install Plugin ==
-4. Download the ActiveRFID.  This should include all of the following files:
+4. Now the hardware is set up. Keep your SSH session open.
+
+5. Download the latest ActiveRFID plugin from this site.  This should include all of the following files:
  * D_ActiveRFID.xml
  * D_RFIDTransmitter.json
@@ -27 +28 @@
  * S_RFIDTransmitter.xml
 
-5. 
+== Setup ==
+
+6.