Changes between Version 6 and Version 7 of WikiStart

Timestamp:

2010-07-01 22:21:38 (14 years ago)

Author:

woodsby

Comment:

--

WikiStart

@@ -9 +9 @@
 1. Plug your RFID receiver into one of Vera's USB ports.  Log into Vera from any web browser and navigate to Devices > Luup plugins > Serial Port configuration. If your receiver shows up as a new serial device, you can skip to step 4.
 
-2. SSH into your Vera. If you have never done this, you can refer to the instructions provided in the Luup Somfy Walkthrough on the MCV Wiki [http://wiki.micasaverde.com/index.php/Luup_Somfy_Walkthrough#Step_1:_SSH_into_Vera here].
+2. Log in to your Vera using SSH. If you have never done this, you can refer to the instructions provided in the Luup Somfy Walkthrough [http://wiki.micasaverde.com/index.php/Luup_Somfy_Walkthrough#Step_1:_SSH_into_Vera here].
+
+3. Enter the following at the command prompt:
+{{{
+echo "vendor:067b product:2303" >> /etc/cmh/serproxy.ports
+}}}