UI5

Setup

Panel connected to Vera on USB port

1. Go to MiOS developers -> Serial port configuration.
   • Set the Baud to 9600.
   • Select the alarm panel device from the Used by device drop-down list.
   • Optionally you can give a name to this serial port in the Name field.
2. Save.
3. After Luup has restarted reload the UI.

Panel connected to Vera on Ethernet port

1. Open the alarm panel device control panel -> Advanced tab. In the ip input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is 192.168.8.164 and it is connected on port 5000, the ip value should be 192.168.8.164:5000)
2. Save.
3. After Luup has restarted reload the web page.