Changes between Initial Version and Version 1 of TracUpgrade


Ignore:
Timestamp:
2011-10-02 20:16:24 (12 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracUpgrade

    v1 v1  
     1= Upgrade Instructions = 
     2[[TracGuideToc]] 
     3 
     4== Instructions == 
     5 
     6Typically, there are seven steps involved in upgrading to a newer version of Trac: 
     7 
     8=== 1. Update the Trac Code === #UpdatetheTracCode 
     9 
     10Get the new version as described in TracInstall, or your operating system specific procedure. 
     11 
     12If you already have a 0.11 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation: 
     13 
     14{{{ 
     15# easy_install --upgrade Trac==0.12 
     16}}} 
     17 
     18If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]). 
     19 
     20You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions. 
     21The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical: 
     22 * on Linux: `/usr/lib/python2.X/site-packages` 
     23 * on Windows: `C:\Python2.X\lib\site-packages` 
     24 * on MacOSX: `/Library/Python/2.X/site-packages` 
     25 
     26You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. (The exact location depends on your platform.) 
     27 
     28This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things. 
     29 
     30=== 2. Upgrade the Trac Environment === #UpgradetheTracEnvironment 
     31 
     32Environment upgrades are not necessary for minor version releases unless otherwise noted.  
     33 
     34After restarting, Trac should show the instances which need a manual upgrade via the automated upgrade scripts to ease the pain. These scripts are run via [TracAdmin trac-admin]: 
     35{{{ 
     36trac-admin /path/to/projenv upgrade 
     37}}} 
     38 
     39This command will do nothing if the environment is already up-to-date. 
     40 
     41Note that a backup of your database will be performed automatically prior to the upgrade.  
     42This feature is relatively new for the PostgreSQL or MySQL database backends, so if it fails, you will have to backup the database manually. Then, to perform the actual upgrade, run: 
     43{{{ 
     44trac-admin /path/to/projenv upgrade --no-backup 
     45}}} 
     46 
     47=== 3. Update the Trac Documentation === #UpdatetheTracDocumentation 
     48 
     49Every [TracEnvironment Trac environment] includes a copy of the Trac documentation for the installed version. As you probably want to keep the included documentation in sync with the installed version of Trac, [TracAdmin trac-admin] provides a command to upgrade the documentation: 
     50{{{ 
     51trac-admin /path/to/projenv wiki upgrade 
     52}}} 
     53 
     54Note that this procedure will leave your `WikiStart` page intact. 
     55 
     56=== 4. Resynchronize the Trac Environment Against the Source Code Repository === 
     57 
     58Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[http://trac.edgewall.org/ticket/6120 No changeset ??? in the repository]" while browsing the source through the Trac interface: 
     59 
     60{{{ 
     61trac-admin /path/to/projenv repository resync '*' 
     62}}} 
     63 
     64=== 5. Refresh static resources === 
     65 
     66If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command: 
     67{{{ 
     68trac-admin /path/to/env deploy /deploy/path 
     69}}} 
     70this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`. 
     71 
     72Some web browsers cache CSS and Javascript files persistently, so you may need to instruct your users to manually erase the contents of their browser's cache. 
     73 
     74=== 6. Steps specific to a given Trac version  === 
     75==== Upgrading from Trac 0.11 to Trac 0.12 ==== 
     76===== Python 2.3 no longer supported ===== 
     77The minimum supported version of python is now 2.4 
     78 
     79===== SQLite v3.x required ===== 
     80SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details. 
     81 
     82===== PySqlite 2 required ===== 
     83PySqlite 1.1.x is no longer supported. Please install 2.5.5 or later if possible (see [#Tracdatabaseupgrade Trac database upgrade] below). 
     84 
     85===== Multiple Repository Support ===== 
     86The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration. 
     87 
     88This may be of interest to users with only one repository, since there's now a way to avoid the potentially costly resync check at every request. 
     89 
     90===== Improved repository synchronization ===== 
     91In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories. 
     92 
     93While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories. 
     94 
     95Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references, as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications. 
     96 
     97===== Authz permission checking ===== 
     98The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions (with `trac-admin $ENV permission remove` or the "Permissions" admin panel). 
     99 
     100==== Upgrading from Trac 0.10 to Trac 0.11 ==== 
     101===== Site Templates and Styles ===== 
     102The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information. 
     103 
     104If you are using custom CSS styles or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance. 
     105 
     106===== Trac Macros, Plugins ===== 
     107The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins. 
     108 
     109===== For FCGI/WSGI/CGI users ===== 
     110For those who run Trac under the CGI environment, run this command in order to obtain the trac.*gi file: 
     111{{{ 
     112trac-admin /path/to/env deploy /deploy/directory/path 
     113}}} 
     114 
     115This will create a deploy directory with the following two subdirectories: `cgi-bin` and `htdocs`. Then update your Apache configuration file `httpd.conf` with this new `trac.cgi` location and `htdocs` location. 
     116 
     117===== Web Admin plugin integrated ===== 
     118If you had the webadmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11. 
     119 
     120=== 7. Restart the Web Server === #RestarttheWebServer 
     121 
     122If you are not running [wiki:TracCgi CGI], reload the new Trac code by restarting your web server. 
     123 
     124== Known Issues == 
     125 
     126=== parent dir === 
     127If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work. 
     128 
     129=== Wiki Upgrade === 
     130`trac-admin` will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version. 
     131 
     132=== Trac database upgrade === 
     133 
     134A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434]. 
     135 
     136== Upgrading Python == 
     137 
     138Upgrading Python to a newer version will require reinstallation of Python packages: Trac of course; also [http://pypi.python.org/pypi/setuptools easy_install], if you've been using that.  Assuming you're using Subversion, you'll also need to upgrade the Python bindings for svn. 
     139 
     140=== Windows and Python 2.6 === 
     141 
     142If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [http://alagazam.net/ Algazam], which has the Python bindings readily available (see TracSubversion).  The good news is, that works with no tweaking. 
     143 
     144== Changing Database Backend == 
     145=== SQLite to PostgreSQL === 
     146 
     147The [http://trac-hacks.org/wiki/SqliteToPgScript sqlite2pg] script on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating a SQLite database to a PostgreSQL database 
     148 
     149== Older Versions == 
     150 
     151For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions]. 
     152 
     153----- 
     154See also: TracGuide, TracInstall