[[Image(gw.jpg, align=right, 600px)]]
= Connecting Radio Module =


== Wire things up ==
Use the dupont cables and follow the table below to connect the nRF24L01 to your Arduino board.

For more information about the radio chip, have a look here:\\
http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01

For a more comprehensive guide how to connect radio chip (use RF24 library setup):\\
http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo

\\
\\
||=Signal  =||=nRF24L01 pin (RF24) =||=Cable color(*) =||=Arduino pin =|| 
||GND||1||Brown||GND||
||VCC||2||Red||3.3V||
||CE||3||Orange||9||
||CSN||4||Yellow||10||
||SCK||5||Green||13||
||MOSI||6||Blue||11||
||MISO||7||Violet||12||
||IRQ||8||Gray||2||
(*) optional

[[Image(nRF24L01.jpg, align=right, width=300px)]]
[[Image(radio.jpg)]]\\
Bottom view of nRF24L01