[[Image(gw.jpg, align=right, 300px)]]

=== Wire things up ===
Use the dupont cables and follow the table below to connect the nRF24L01 to your Arduino board.

For more information about the radio chip, have a look here:
http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01


||=Signal  =||=nRF24L01 pin (RF24) =||=Cable color(*) =||=Arduino pin =|| 
||GND||1||Brown||GND||
||VCC||2||Red||3.3V||
||CE||3||Orange||9||
||CSN||4||Yellow||10||
||SCK||5||Green||13||
||MOSI||6||Blue||11||
||MISO||7||Violet||12||
||IRQ||8||Gray||2 (*)||
(*) optional