[[Image(gw.jpg, align=right, 600px)]] = Connecting Radio Module = == Wire things up == Use the dupont cables and follow the table below to connect the nRF24L01 to your Arduino board. For more information about the radio chip, have a look here:\\ http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01 For a more comprehensive guide how to connect radio chip (use RF24 library setup):\\ http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo \\ \\ ||=Signal =||=nRF24L01 pin (RF24) =||=Cable color(*) =||=Arduino pin =|| ||GND||1||Brown||GND|| ||VCC||2||Red||3.3V|| ||CE||3||Orange||9|| ||CSN||4||Yellow||10|| ||SCK||5||Green||13|| ||MOSI||6||Blue||11|| ||MISO||7||Violet||12|| ||IRQ||8||Gray||2|| (*) optional [[Image(nRF24L01.jpg, align=right, width=300px)]] [[Image(radio.jpg)]]\\ Bottom view of nRF24L01