[[Image(VeraMotion.png, align=right)]]
= Motion Sensor =

== Software ==
You can download the Arduino sketch here:\\
http://code.mios.com/git_public/mios/arduino-sensor.git/tree/HEAD:/VeraArduino/Arduino/libraries/Vera/examples/MotionSensor?js=1\\

This sensor sleeps most of the time. If interrupt on digital input occurs it wakes up and transmits change. 

== Wire things up ==

Follow the instructions in ConnectingRadioModule to connect radio module.

Connect the digital OUT of the motion sensor to digital input 3 of Arduino board. 
Connect VCC to +5V of the Arduino board. GND to GND.
Use the trimpot Sx on sensor to set sensitivity. Trimpot Tx tunes how long the sensor should be triggered (5sec min - 200sec max).

== Hardware - Purchase guide ==

To build this sensor you'll need one arduino + radio specified in the base kit found here:\\
http://code.mios.com/trac/mios_arduino-sensor/wiki/WikiStart#Buyingguide\\

With the following additional parts:\\
1x [[http://www.tkqlhce.com/click-7319170-10881559?url=http%3A%2F%2Fwww.aliexpress.com%2Fitem%2FFreeshipping-PIR-Sensor-Human-Body-detecting-module-Pyroelectric-HC-SR501-For-Arduino-MCU%2F967005480.html|Motion sensor]]\\

TOTAL SENSOR PRICE: $7.6 (arduino + radio) + $1.7 (motion sensor) = '''$9.3'''

[[Image(motion.jpg, width=500px)]]