Changes between Version 12 and Version 13 of Installation-UI4

Timestamp:

2011-10-03 03:19:53 (13 years ago)

Author:

guessed

Comment:

Add starter description for EtherBee? configuration.

Installation-UI4

@@ -21 +21 @@
 This will create the Brultech device, but it's Serial Port still needs to be assigned and another Save / Restart cycle performed.
 
-== Serial Port Assignment ==
+== Serial or Ethernet Attached ==
+Your ECM-1240 will be either Serial (USB) Attached to Vera, or will be attached via Ethernet (using an !EtherBee Module)
+
+Select the appropriate configuration instructions below, based upon how you have this deployed.
+
+=== Serial Attached ECM-1240 ===
 If you're using a direct-attached [http://wiki.micasaverde.com/index.php/Serial_Supported_Hardware USB-Serial device] to attach to your Brultech ECM-1240, then follow these steps to associate the Serial Port with this plugin
 
@@ -30 +35 @@
  1. The screen will change to this[[BR]][[Image(BrultechSerialPortSetup3.png, 30%)]]
  1. Close this Dialog and perform a MiOS ''(Save)'' action.
+
+=== !EtherBee Attached ECM-1240 ===
+If you're using an !EtherBee to connect your ECM-1240, then you'll need to know the IP Address, and Port, that the Etherbee is configured for.
+
+In the example below, we'll use 192.168.5.58, and a Port of 5000.  Your installation may be different.
+
+ 1. Invoke the Edit Dialog for the Brultech Device.
+ 1. Enter the "ip" as ''<ipAddress>:<port>'' as in this example[[BR]][[Image(BrultechIPSetup1.png, 30%)]]
+ 1. Close this Dialog and perform a MiOS ''(Save)'' action.
+
 
 == Configure the Plugin ==