Changes between Version 17 and Version 18 of WikiStart

Timestamp:

2011-10-28 12:28:47 (13 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ +1 @@
+= GE Caddx NetworX NX-584 and NX-8E Alarm Plugin =
+
 Discussion for this Luup plugin is on the Micasaverde forum at http://forum.micasaverde.com/index.php?topic=4060.0
 
 '''Got one of these panels? You can help''' by testing [wiki:TestScenarios test scenarios] that I don't have equipment for.
 
-= Introduction  =
+== Introduction ==
 
 The NX series of alarm panels from (in various parts of the world) GE, Interlogix, Caddx, Networx, Hills or DAS Systems has a serial interface which lets you monitor partitions and zones, arm and disarm the system, and program the panel.
@@ -11 +13 @@
 This Luup plugin provides continuous monitoring of partitions and zones, reporting partitions' armed status and zones' tripped and bypass status, whether the system is armed or not. Additionally, if configured, the plugin can send Arm and Disarm events to the panel, allowing remote arming and disarming of partitions through scenes.
 
-= Preparing the alarm system interface =
+== Preparing the alarm system interface ==
 
 The NX-584 must be programmed from a keypad connected to the alarm system. 
@@ -43 +45 @@
 (Todo: write instructions for this, referring to the NX-584 installation manual.) 
 
-= Connecting Vera to the NX-584/NX-8E  =
+== Connecting Vera to the NX-584/NX-8E ==
 
 [wiki:PhysicalConnection Physically connecting the alarm panel to Vera] varies depending on your own situation.
 
-= Install and set up the plugin =
+== Install and set up the plugin ==
 
 * For '''UI4''' click [wiki:UI4 here].
 * For '''UI5''' click [wiki:UI5 here].
 
-= Scan for zones =
+== Scan for zones ==
 
 Zones are not detected automatically, so you must scan for the zones that your alarm system has.  Click on the main alarm device's configuration icon (spanner/wrench), and go to the '''Zones''' tab.  (It may be necessary to click the tab a second time.)