Changes between Version 3 and Version 4 of WikiStart


Ignore:
Timestamp:
2010-08-15 09:48:45 (14 years ago)
Author:
futzle
Comment:

Remove links to accidental CamelCase words

Legend:

Unmodified
Added
Removed
Modified

  • WikiStart

    v3 v4  
    7474 
    7575 1. Enter Vera setup, select Devices, the Luup Plugins. Scroll to the bottom to Add Device. 
    76  2. In the UpnpDevFilename text box, enter D_CaddxNX584Security.xml and click Add Device. 
     76 2. In the !UpnpDevFilename text box, enter D_CaddxNX584Security.xml and click Add Device. 
    7777 3. Give the device a name and assign it to a room.  
    7878 4. Go to Serial Port Configuration and assign the serial port (local or IPSerial) to the Luup device you just created.  
    … …  
    9090 2. Add a new scene (global or in a room).  
    9191 3. Click Advanced and pick a partition device (e.g., Partition 1). Click Add.  
    92  4. Select action RequestArm and type a PIN code for a user already registered with the alarm system.  
     92 4. Select action !RequestArm and type a PIN code for a user already registered with the alarm system.  
    9393 5. Save. 
    9494 
    … …  
    9797Similar scenes can be created to disarm the panel or to arm the panel in Stay (Partial) mode. 
    9898 
    99 Tip: On the Caddx alarm system it is possible to create users with permission to Arm a partition but not Disarm a partition. If you prefer to not allow Vera to disarm, give it the PIN for a user restricted in this way, and the RequestDisarm action will fail. 
     99Tip: On the Caddx alarm system it is possible to create users with permission to Arm a partition but not Disarm a partition. If you prefer to not allow Vera to disarm, give it the PIN for a user restricted in this way, and the !RequestDisarm action will fail.