Changes between Version 7 and Version 8 of UI4

Timestamp:

2012-02-23 01:22:27 (13 years ago)

Author:

strangely

Comment:

--

UI4

@@ -1 @@
-= UI4 Installation and Setup =
+= UI4 Installation and Setup for IT100 =
 
 * If the previous DSC plug-in was installed, then it is recommended to uninstall it first, and then remove the plug-in files from the via SSH
@@ -34 +34 @@
 * Exit this screen and then Save.
 * Again if everything is working, the 8 devices should have been created.
+
+= UI4 Installation and Setup for IP170/2DS =
+
+NOTE this is currently beta only and will only work if the IP170/2DS has the correct firmware.
+
+ * Download the plug-in from [http://code.mios.com/trac/mios_dscalarmpanel/changeset/74/branches/2ds?old_path=%2F&format=zip this ]location.
+ * Install as per the above procedure and follow the creation instructions for The IT100 and WIZnet; however for the IP address the port needs to be changed to 4025 instead of 5000.
+ * After the Plugin is created, open the advanced tab of the parent device and change the InterfaceType variable from IT100 to 2DS then Save.