Changes between Version 11 and Version 12 of UI5

Timestamp:

2012-06-11 06:37:47 (12 years ago)

Author:

strangely

Comment:

Removed instructions to outdated plugin version install.

UI5

@@ -27 +27 @@
 == UI5 Installation and Setup for IP170/2DS ==
 
-NOTE this is currently beta only and will only work if the IP170/2DS has the correct firmware.
+NOTE this should be considered beta only whilst there are still issues to be resolved concerning connectivity.
 
-1. Download the plug-in from [http://code.mios.com/trac/mios_dscalarmpanel/changeset/74/branches/2ds?old_path=%2F&format=zip this ]location.
-2. On the Vera UI go to '''Apps''' >> '''Develop Apps''' >> '''Luup files''' and upload all the files from that archive. Do not check ''Restart Luup after upload''. If it's checked, uncheck it. Click '''GO''' to upload the files on Vera.
-3. Go to '''Create device'''.
- * In the '''Description''' field enter ''DSC Alarm Panel''.
- * In the '''Upnp Device Filename''' field enter ''D_DSCAlarmPanel1.xml''.
- * In the '''Ip Address''' field enter the IP address and port of the 2DS. The port is ''4025''. E.g. if the IP address of the 2DS is ''192.168.81.63'' the IP Address field must look like this: ''192.168.81.63:4025''.
- * Click on the '''Create device''' button to create the device.
-4. Reload Luup.
-5. After the plugin is created, open the control panel of the parent device (the one called ''DSC Alarm Panel'') by clicking on the wrench, go to the '''Advanced''' tab, scroll to the bottom until you can see the '''!InterfaceType''' field and change it from ''IT100'' to '''''2DS'''''.
-6. Save.
+1. Download the plugin from Vera's app store (cp.mios.com user account login required)
+2. Once the plugin has installed, click the wrench for the newly created device and select 2DS as the interface type.
+3. * In the advanced tab of the device enter the IP address of the 2DS in the '''Ip Address''' field.
+4. Reload Luup/Save