= UI5 Installation and Setup =

== Installation ==
Go to '''Apps''' >> '''Install Apps''' and install the plugin. 

== Setup ==

=== IT-100 connected to Vera using an USB-to-RS232 converter ===
1. Go to '''Apps''' -> '''Develop Apps''' -> '''Serial port configuration'''.
 * Set the '''Baud''' to ''9600''.
 * Select the alarm panel device from the '''Used by device''' drop-down list.
 * Optionally you can give a name to this serial port in the '''Name''' field.
2. Save.
3. After Luup has restarted reload the web page.
[[Image(ui5_serial_port_config.png)]]

=== IT-100 connected to Vera using a WIZnet or Roving Networks IP-to-Serial adapter ===
1. Open the alarm panel device control panel -> '''Advanced''' tab. In the '''ip''' input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is ''192.168.8.164'' and it is connected on port ''5000'', the '''ip''' value should be ''192.168.8.164:5000'')
2. Save.
3. After Luup has restarted reload the web page.
[[Image(ui5_ip_config.png)]]