Changes between Version 12 and Version 13 of WikiStart

Timestamp:

2011-10-13 17:35:52 (13 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ -29 +29 @@
 * Direct Connection to a USB to RS232 serial adapter thats supported by Vera such as [http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=UC232R10FUTURETECHNOLOGYDEVICES2297802 this ] one.
 * Wired Ethernet Connection via an IP to RS232 serial adapter such as WIZnet device like [http://www.sparkfun.com/commerce/product_info.php?products_id=9476 this] one.
-* WiFi to RS232 serial adapter such as [http://www.mouser.com/ProductDetail/Roving-Networks/RN-134/?qs=sGAEpiMZZMvdqMP%2faZ%252bGClQs06owUsC0 this] one.
+* !WiFi to RS232 serial adapter such as [http://www.mouser.com/ProductDetail/Roving-Networks/RN-134/?qs=sGAEpiMZZMvdqMP%2faZ%252bGClQs06owUsC0 this] one.
 
 
@@ -131 +131 @@
 * Check the "Restart Luup after upload" box and click Go
 * After the Engine restarts, click on the create device tab of the MiOS developers icon.
-* In the "Description" field, enter a name for the plug-in, similarly in the "UpnpDevFilename" field enter '''D_DSCAlarmPanel1.xml''' and in the "UpnpImplFilename" field enter '''I_DSCAlarmPanel1.xml'''
+* In the ''Description'' field, enter a name for the plug-in, similarly in the ''!UpnpDevFilename'' field enter '''D_DSCAlarmPanel1.xml''' and in the ''!UpnpImplFilename'' field enter '''I_DSCAlarmPanel1.xml'''
 
 NOTE: It is critical to enter the file names exactly as above, this includes the case sensitivity!
 
-* If this is being used with a WIZnet or Roving Networks IP to Serial adapter that’s already been configured, then at this stage the IP and port number of the device can also be entered in the IpAddress field
+* If this is being used with a WIZnet or Roving Networks IP to Serial adapter that’s already been configured, then at this stage the IP and port number of the device can also be entered in the ''!IpAddress'' field (e.g. 192.168.8.23:5000)
 * Click Create device and then exit