Changes between Version 6 and Version 7 of WikiStart

Timestamp:

2010-06-11 05:40:48 (14 years ago)

Author:

javier_guerra

Comment:

--

WikiStart

@@ -34 +34 @@
 If the IT-100 interface is connected to Vera with an USB-Serial adapter, there should appear a serial port device.  The MiOS Marketplace should let you create the main alarm panel device; then you have to associate the serial port with the main panel device.
 
-Partitions and zones are configured on the panel itself.  Note the number of each one (partitions are numbered 1-8, zones are 1-64) and open the main panel device.  Go to the 'Advanced' tab, and add some new variables, all with the service ID "urn:micasaverde-com:serviceId:AlarmPanel1":
+Partitions and zones are configured on the panel itself.  Note the number of each one (partitions are numbered 1-8, zones are 1-64) and open the main panel device.  Go to the 'Advanced' tab, and set three variables, all with the service ID "urn:micasaverde-com:serviceId:AlarmPanel1":
 
 ''' '!ActivePartitions' ''':
@@ -45 +45 @@
 A comma-separated list of the zone numbers that represent smoke sensors.
 
-After adding these variables, Luup will restart and the plugin will create one subdevice for each parition and zone.
+After setting these variables, close the dialog and hit the 'Save' icon.  Luup will restart and the plugin will create one subdevice for each parition and zone.