Changes between Version 11 and Version 12 of UI4

Timestamp:

2011-10-26 14:26:13 (13 years ago)

Author:

mcvflorin

Comment:

--

UI4

@@ -12 +12 @@
 5. Close this window and save.
 
-=== Elk M1-XEP ===
-Follow the installation and configuration procedure in the '''M1-XEP Installation Manual'''.
+=== Elk M1XEP ===
+Follow the installation and configuration procedure in the '''M1XEP Installation Manual'''.
 
 === !WiFi RS-232 Serial Adapter ===
@@ -33 +33 @@
  * In the '''!UpnpDevFilename''' field enter ''D_ElkAlarmPanel1.xml''
  * In the '''Description''' field enter ''Elk M1 Alarm Panel'' (or any name you want).
- * If the panel is connected to Vera on the '''Ethernet''' port (using Elk M1XEP or an RS232-to-Ethernet adapter), enter the IP address and port in the '''!IpAddress''' field (e.g. 192.168.8.23:5000).
+ * If the panel is connected to Vera on the '''Ethernet''' port using the Elk M1XEP or '''wireless''' using a WiFi RS-232 Serial Adapter, enter the IP address and port in the '''!IpAddress''' field (e.g. 192.168.8.23:5000).
  * Optionally you can select a room from the '''Room''' drop-down list.
  * Click '''Create Device'''.