= Elk M1 Alarm Panels Plugin =

== Installation ==

1. Download these files on your computer:

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/D_ElkAlarmPanel1.json|D_ElkAlarmPanel1.json]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/D_ElkAlarmPanel1.xml|D_ElkAlarmPanel1.xml]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/D_ElkAlarmPartition1.json|D_ElkAlarmPartition1.json]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/D_ElkAlarmPartition1.xml|D_ElkAlarmPartition1.xml]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/I_ElkAlarmPanel1.lua|I_ElkAlarmPanel1.lua]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/I_ElkAlarmPanel1.xml|I_ElkAlarmPanel1.xml]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/S_AlarmPartition2.xml|S_AlarmPartition2.xml]]

[[http://code.mios.com/svn_public/mios_elk-alarm-panel/S_ElkAlarmPanel1.xml|S_ElkAlarmPanel1.xml]]

2. On the Vera dashboard, go to '''MiOS Developers''' -> '''Luup Files''' and upload all 8 files you downloaded.
3. If ''Restart Luup after upload'' is checked, uncheck it, then click '''GO'''.
4. Go to '''Create Device'''; in the '''!UpnpDevFilename''' field enter ''D_ElkAlarmPanel1.xml'' and in the '''Description''' field enter ''Elk M1 Alarm Panel'' (or any name you want).  Press the '''Create Device''' button.

'''NOTE:''' If the panel is connected to Vera on the '''Ethernet''' port (using Elk M1XEP or an RS232-to-Ethernet adapter), enter the IP address and port in the '''!IpAddress''' field (e.g. 192.168.8.23:5000).
5. Restart Luup by clicking the curving arrows in the upper right corner in the dashboard.
6. After Luup has restarted, reload the web page. (best use <Ctrl + F5> to do so)

== Setup ==
If the panel has been connected to Vera on an USB port, you must configure the serial port.
1. Go to '''MiOS developers''' -> '''Serial port configuration'''.
 * Set the '''Baud''' to ''115200''.
 * Select the newly created panel device from the '''Used by device''' drop-down list.
 * Optionally you can give a name to this serial port in the '''Name''' field.
2. Close this window and click '''SAVE'''.
3. After Luup has restarted reload the web page.
4. Enjoy using the plugin. :)
[[Image(serial_port_configuration.png)]]