Elk M1 Alarm Panels Plugin

Setup

Panel connected to Vera on an USB port

1. Go to MiOS developers -> Serial port configuration.
   • Set the Baud to 115200.
   • Select the newly created panel device from the Used by device drop-down list.
   • Optionally you can give a name to this serial port in the Name field.
2. Close this window and click SAVE.
3. After Luup has restarted reload the web page.

Panel connected to Vera on the Ethernet port (using Elk M1XEP or an RS232-to-Ethernet adapter)

1. Open the alarm panel device control panel -> Advanced tab. In the ip input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is 192.168.8.164 and it is connected on port 5000, the ip value should be 192.168.8.164:5000)
2. Save.
3. Enjoy using the plugin. :)