= Elk M1 Alarm Panels Plugin =

== Setup ==
=== Panel connected to Vera on an '''USB''' port ===
1. Go to '''MiOS developers''' -> '''Serial port configuration'''.
 * Set the '''Baud''' to ''115200''.
 * Select the newly created panel device from the '''Used by device''' drop-down list.
 * Optionally you can give a name to this serial port in the '''Name''' field.
2. Close this window and click '''SAVE'''.
3. After Luup has restarted reload the web page.
[[Image(ui5_serial_port_config.png)]]

=== Panel connected to Vera on the '''Ethernet''' port (using '''Elk M1XEP''' or an RS232-to-Ethernet adapter) ===
1. Open the alarm panel device control panel -> '''Advanced''' tab. In the '''ip''' input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is ''192.168.8.164'' and it is connected on port ''5000'', the '''ip''' value should be ''192.168.8.164:5000'')
2. Save.
3. Enjoy using the plugin. :)
[[Image(ui5_ip_config.png)]]