Changes between Version 11 and Version 12 of Wiki Start

Timestamp:

2011-10-13 19:49:46 (13 years ago)

Author:

mcvflorin

Comment:

--

Wiki Start

@@ -28 +28 @@
 [[http://code.mios.com/svn_public/mios_elk-alarm-panel/S_ElkAlarmPanel1.xml|S_ElkAlarmPanel1.xml]]
 
-2. On the Vera dashboard, go to ''MiOS Developers'' -> ''Luup Files'' and upload all 8 files you downloaded.
-3. If ''Restart Luup after upload'' is checked, uncheck it, then click ''GO''.
-4. Go to ''Create Device''; in the ''!UpnpDevFilename'' field enter ''D_ElkAlarmPanel1.xml'' and in the ''Description'' field enter ''Elk M1 Alarm Panel'' (or any name you want). If the panel is connected to Vera on the Ethernet port (using Elk M1XEP or an RS232-to-Ethernet adapter), enter the IP address and port in the ''!IpAddress'' field (e.g. 192.168.8.23:5000). Press the ''Create Device'' button.
+2. On the Vera dashboard, go to '''MiOS Developers''' -> '''Luup Files''' and upload all 8 files you downloaded.
+3. If ''Restart Luup after upload'' is checked, uncheck it, then click '''GO'''.
+4. Go to '''Create Device'''; in the '''!UpnpDevFilename''' field enter ''D_ElkAlarmPanel1.xml'' and in the '''Description''' field enter ''Elk M1 Alarm Panel'' (or any name you want).  Press the '''Create Device''' button.
+
+'''NOTE:''' If the panel is connected to Vera on the Ethernet port (using Elk M1XEP or an RS232-to-Ethernet adapter), enter the IP address and port in the '''!IpAddress''' field (e.g. 192.168.8.23:5000).
 5. Restart Luup by clicking the curving arrows in the upper right corner in the dashboard.
 6. After Luup has restarted, reload the web page. (best use <Ctrl + F5> to do so)