| Version 3 (modified by mcvflorin, 13 years ago) (diff) |
|---|
Elk M1 Alarm Panel Plugin
Plugin for basic integration with the Elk M1 panels.
Current Version
1.0 beta
Compatible Products
- M1 Gold
- M1 M1EZ8 with ELK-M1EZ8MSI Main Serial Port Interface
Notes
- Arming or Bypassing zones requires the PIN code.
- Arming or Disarming a partition also requires the PIN code.
Usage
Pressing the Clear Message button clears the status message displayed in the upper right corner of the dashboard.
The status displayed is the current arm mode.
The status displayed is the current arm mode.
The Elk M1 alarm panel requires the user code to arm/disarm a partition or to bypass/unbypass a zone. Enter the user code in the PIN Code field then click Store. The user code is stored securely and can't be accessed by anyone. It is NOT stored in a state variable to be visible by anyone with access to the Vera. This also means that the user code is lost when the Luup engine restarts and it needs to be entered again.
Pressing the Clear button erases the user code from memory.
It's not necessary to store the user code to arm/disarm a partition, but it must be present in the PIN Code field.
Attachments
- panel_dashboard.png (6.7 KB) - added by mcvflorin 13 years ago.
- partition_dashboard.png (6.7 KB) - added by mcvflorin 13 years ago.
- partition_toolbox.png (22.1 KB) - added by mcvflorin 13 years ago.
- debug_mode.png (2.9 KB) - added by mcvflorin 13 years ago.
