Changes between Version 17 and Version 18 of WikiStart

Timestamp:

2014-03-18 10:30:38 (11 years ago)

Author:

gengen

Comment:

--

WikiStart

@@ -55 +55 @@
 [[Image(Constom_Screen.png)]]
 
-* Temperature Screens. These show the current temperature in degrees Fahrenheit according to the associated thermostat. There are also arrows for increasing and decreasing the temperature. Temperature screens 1 and 2 have fixed labels. You can edit the top and bottom labels in temperature screens 3 through 6. 
+* Temperature Screens. These show the current temperature in degrees Fahrenheit according to the associated thermostat. There are also up and down arrows for changing the temperature. Temperature screens 1 and 2 have fixed labels. You can edit the top and bottom labels in temperature screens 3 through 6. Note that the LCD1 does not have its own built-in temperature sensor. 
 [[Image(Temperature_Screen.png)]]
 
@@ -86 +86 @@
 == Tuning Parameters ==
 
-In the Advanced tab, you will find various tuning parameters which may be used to improve performance. The values of these parameters may depend on how far your LCD controller is away from Vera as well as the firmware version of the controller. When you first create the device one of two sets of parameters is chosen depending on whether the firmware version is greater than 0.31 or not. This plug-in was developed mostly with firmware version 0.37. All delay parameters are in milliseconds
+In the Advanced tab, you will find various tuning parameters which may be used to improve performance. The values of these parameters may depend on how far your LCD controller is away from Vera as well as the firmware version of the controller. When you first create the device one of two sets of parameters is chosen depending on whether the firmware version is greater than 0.31 or not. This plug-in was developed mostly with firmware version 0.39. All delay parameters are in milliseconds
 
 ||= Parameter =||= Meaning =||= 0.31 default =||= 0.37 default =||
@@ -100 +100 @@
 ||ShowSingleDevice || Set to 0 to show both the Z-Wave and peer devices in UI5 || 1 || 1 ||
 
+If your LCD1 firmware is older than 00.00.39, we recommend contacting Evolve Guest Controls for an upgrade to the latest firmware (unless you absolutely need support for foreign languages in some of the fixed screens, which was rrmoved in 00.00.39) since the new firmware is more reliable.
+ 
 == Evolve Documnetation ==