Changes between Version 14 and Version 15 of WikiStart

Timestamp:

2011-03-05 00:22:26 (13 years ago)

Author:

ojas

Comment:

--

WikiStart

@@ -3 +3 @@
 [[Image(/export/HEAD/images/EZ430-Chronos.png)]] 
 
-== Demo Videos ==
+[=#demovideos]== Demo Videos ==
 
 * [http://www.youtube.com/watch?v=ohbJrp4wflg The watch controlling lights]
@@ -88 +88 @@
 Enter {{{D_eZ430Chronos.xml}}} as the //UpnpDevFilename//, and a name for your new device as the //Description//.  Then click on the //Create device// button.
 
-2. Select //MiOS developers// then //Serial Port configuration//, and assign your new device to the serial port for the USB dongle:
+2. Select //MiOS developers// then //Serial Port configuration//, and find the serial port named [{{usbserial}}]:
 
 [[Image(/export/HEAD/images/serial1.png)]]
 
-Select {{{115200}}} as the baud rate, and then select your new device from the //Used by device// dropdown list.  If you have multiple serial ports, make sure you are configuring the one named {{{usbserial}}}.  If you do not see your new device in the list, you may have to refresh your Vera.
+Select {{{115200}}} as the baud rate, and then select your new device from the //Used by device// dropdown list.  If you do not see your new device in the list, you may have to refresh your Vera.
 
 3. Once you select your device, you will be immediately taken to a dialog like the following:
@@ -107 +107 @@
 
 === Testing ===
+
+Before following the procedure below, consult the [#demovideos demo videos] to get a sense of operation.
 
 1.  Toggle the # button on your Chronos until the //PPt// mode is enabled.