Changes between Version 7 and Version 8 of WikiStart

Timestamp:

2012-07-24 14:21:59 (12 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ -60 +60 @@
 
 If ''Quick Arm'' is enabled, it's possible to arm the partition without entering the User Code. However, disarming will still require the user code.
-* '''Arm / bypass zone'''
+* '''Bypass / unbypass zone'''
+1. Open the control panel of the alarm panel device, then the ''Zones'' tab. You will see the list of the detected zones in all partitions and their status.
+2. Enter the user code valid in the partition the zone belongs to in the ''Pin'' input box.
+3. Click on the buttons to bypass/unbypass the zones.
+4. Wait several seconds (about 10 seconds to be sure) then click on the ''Zones'' tab again to refresh it.
 * '''Enable / disable Chime Mode'''
+1. Open the control panel of the partition.
+2. Press the ''Toggle Chime Mode'' button.
 * '''Activate panic alarm'''
+1. Open the control panel of the partition.
+2. Press the button to activate the desired panic alarm.
+{{{
+#!html
+<p style="font-weight:bold; color:red">
+WARNING: The alarm will go off immediately! No confirmation dialog will appear.
+</p>
+}}}
 
 === In scenes ===