[[Image(IORelayDevice-UI4.png,align=right,20%,title=IORelay Plugin)]] = Introduction = This component permits the registration of National Control Devices (NCD) [http://www.iorelay.com/ Relay Control] boards with Vera. The use of these devices allows up to 8 Relays, and 8 Analog inputs to be put under the control of Vera manual and Scene control. This Plugin allows the IORelay board to show up as a series of up to 8 Light Switches (On / Off) for the relays under control, and up to 8 Light Sensors (0-100%) for the inputs. For the purposes of Development, the following control boards were used: * 2 Relay, 8 Analog input [http://www.controlanything.com/Relay/Device/R25PL_USB ProXR Lite] * 2 Relay, 8 Analog input [http://www.controlanything.com/Relay/Device/LRR25_USB Reactor Relay] But the same API is used for their Relay boards up to 8 relays, so other types should work also. Additionally, I've added the following Wifi device: * Roving Networks RN-XV "Xvee" [http://www.mouser.com/ProductDetail/Roving-Networks/RN-XV-W/?qs=7nsJMBTpJlzTBgzSFkpUYQ%3d%3d Wifi Adapter] * Mill-Max 50pin [http://www.mouser.com/Search/Refine.aspx?Keyword=575-8314305010 2mm Riser] to replace the on-Board USB device for one of my Relays since it will be remote from Vera. You can order the above devices without the on-Board USB adapter (as needed) = Installation = * For UI4 Installation, please follow the [wiki:Installation-UI4 UI4 Installation procedure] = Scenes = TODO: = Debugging = * For debugging tips, please follow the [wiki:Debugging-UI4 Debugging tips] = References =