== Lutron RadioRA2 Gateway == == Overview == The Lutron RadioRA2 Gateway plugin provides the ability to control your RadioRA2 system via telnet. It provides the ability to control binary switches, dimmers, blinds and keypads. The plugin assumes that your RadioRA2 system is properly configured and working. == Installation == Your Lutron RadioRA2 must be in the same network as your Vera == Configuration == After installing the plugin, a "Lutron RadioRA2 Gateway" device will be created. [[Image(Device.png)]] Go to "Advance" tab from device Control Panel and complete the following: * '''ip''' field - the IP of Lutron RadioRA2 Module * '''username''' and '''password''' - for telnet connection to Lutron RadioRA2 Module * '''DeviceList''' - A list with devices controlled by Lutron RadioRA2 Module. Ex : D:2,4;B:1;S:3;K:5 where "D" - for dimmers; "B" - for blinds; "S" - for binary switches; "K" - for keypads and the number represents the Integration ID of the devices connected to Lutron RadioRA2 Module [[Image(advance.png)]] Now close the device Control Panel window ,click the "Save" button in the upper right corner and refresh your browser. Plugin will create your devices based on the list provided. ***'''IMPORTANT'''*** An additional step is necessary for configuring the keypad. Go to "Advance" tab from keypad Control Panel and complete the "componentNumber" variable as follows : "'''value,value,value,value,value,value,'''" where "value" is the component number assigned for every key of you Keypad. If on of those keys is unused, "value" should be "0".