| 5 | | The Onkyo Audio Video Receiver is a networked receiver that is capable of being controlled through the eISCP protocol. |
| 6 | | |
| 7 | | This plugin can be used to trigger scenes on your Vera device automatically when the device is turned on. This plugin will also allow you to control most of its features which include: |
| 8 | | * Power |
| 9 | | * Volume |
| 10 | | * Mute |
| 11 | | * Input |
| 12 | | * Surround Type |
| 13 | | * Navigation |
| 14 | | * Playback Control |
| 15 | | * HDMI Out |
| 16 | | * Automated commands - Macros |
| 17 | | |
| 18 | | Link to company page http://www.onkyousa.com \\ |
| 19 | | Relevant forum thread http://forum.micasaverde.com/index.php/topic,17811.msg139582.html#msg139582 |
| 20 | | |
| 21 | | == Installation Instructions== |
| 22 | | |
| 23 | | You can install the plugin from http://apps.mios.com/plugin.php?id=5176 or within Vera UI. The plugin name is Onkyo Receiver (AVR). |
| 24 | | |
| 25 | | After installing the plugin a device will automatically be created. |
| 26 | | * Go to the advanced tab of that device and add IP address of your receiver (I recommend setting a static IP address on your receiver). |
| 27 | | * Click save, reload, and refresh the page a couple of times for the buttons to show up. |
| 28 | | * Set the Number of Zones in the Config tab. By default it is set to 2. |
| 29 | | * You will have basic control from the dashboard. |
| 30 | | * Note: You must have "network standby" enabled for this plugin to turn the receiver on and off. |
| 31 | | |
| 32 | | == Configuration== |
| 33 | | |
| 34 | | ||Parameter||Description|| |
| 35 | | |-- |
| 36 | | ||IP Address||(Required) This is the IP address of the Onkyo Receiver.|| |
| 37 | | ||Number of Zones||(Default 2) This correlates how many zones that your receiver supports.|| |
| 38 | | |
| 39 | | == Notifications== |
| 40 | | |
| 41 | | The following notification triggers can be used in your scenes. |
| 42 | | |
| 43 | | ||Status||Description|| |
| 44 | | |---- |
| 45 | | ||On||Is the zone on.|| |
| 46 | | ||Off||Is the zone off|| |
| 47 | | |-- |
| 48 | | ||TBA||More coming in later versions. Suggestions please.|| |
| 49 | | |
| 50 | | == Service Variables== |
| 51 | | This plugin supports 5 service types. Below are the services and the associated variables. |
| | 5 | This guide will specifically address the features of the Macro task automate buttons. |
