= OpenSprinkler Irrigation Controller =
[[Image(http://opensprinkler.cfowl.postinbox.com/Title.png)]]

Version 1.0


= Introduction =

This plugin provides monitoring and control of an OpenSprinkler irrigation controller.  OpenSprinkler is a product manufactured by [http://rayshobby.net/?page_id=160 Rayshobby].

== Plugin Features ==

 * Mode Control : Off / Manual / Auto
 * Configure irrigation stations to be controlled
 * Station name discovery
 * Station status with UI5 icons showing activity
 * Manual station control

= Installation =
 1. Upload the attached files: "Apps > Develop Apps > Luup Files"
[[Image(http://opensprinkler.cfowl.postinbox.com/Step1.png)]]

 2. Create device: "Apps > Develop Apps > Create device" Fill in these fields:
   a. "Upnp Device Filename": "'''D_OpenSprinkler1.xml'''"
   b. "Upnp Implementation Filename": "'''I_OpenSprinkler1.xml'''" 
   c. "Ip Address": "'''Enter the IP Address of OpenSprinkler'''"
[[Image(http://opensprinkler.cfowl.postinbox.com/Step1b.png)]]
   d. Click "Create Device"
   e. Click "Reload"

 3. Navigate to the "Devices" page.  The newly created device looks like:

[[Image(http://opensprinkler.cfowl.postinbox.com/Step2.png)]]

 4. Refresh the browser (Typically pressing F5).  OpenSprinkler will show the default configuration

[[Image(http://opensprinkler.cfowl.postinbox.com/Step3.png)]]

 5. After 60 seconds the station names will be pulled from the OpenSprinkler

[[Image(http://opensprinkler.cfowl.postinbox.com/Step4.png)]]

 6. Configure various options.  e.g. Stations being controller, password, etc.

[[Image(http://opensprinkler.cfowl.postinbox.com/Step5.png)]]

 7. Note how the individual station and controller icons change state when active

[[Image(http://opensprinkler.cfowl.postinbox.com/Step7.png)]]