This is a luup plugin to support the Pioneer VSX-1021 receiver over an Ethernet connection.

It supports input selection, power, menu navigation and volume controls.

Since many Pioneer receivers use the same protocol it likely will work with other Pioneer receivers but I don't have any others to test it with.  If you find a receiver that it works with (or doesn't work with), please post to the MiCasaVerde forums and I will update this file.
[http://forum.micasaverde.com/]

=== Compatibility: ===
UI4

=== Download: ===
[http://code.mios.com/trac/mios_pioneer-receiver/changeset/2/trunk?old_path=%2F&format=zip]

=== Install: ===
To install this plugin, you need to upload the two files to your vera device.

D_PioneerReceiver1.xml[[BR]]
I_PioneerReceiver1.xml[[BR]]

Directions on how to do this can be found on the MiCasaVerde wiki:[[BR]]
[http://wiki.micasaverde.com/index.php/Install_LUUP_Plugins]

After you have created the device, go to the advanced tab, and set the "ip" field to the IP address of your receiver.

=== Example usage ===
How to create a scene that when run will power off your receiver:

Create a new Scene.  Let's call it "Pioneer Receiver Power Off"[[BR]]
In the scene go to the advanced tab.[[BR]]
Ignore the "Scene is active:" setting, it doesn't matter for this example[[BR]]
For "Pick a device" pick your Pioneer Receiver device that you have already created and click the Add button.[[BR]]
Select "Off" from the drop down under "DiscretePower1".[[BR]]
Close the scene.[[BR]]
Click the SAVE button (which should be red now).[[BR]]

You have now created a scene that when run will power off your receiver.

=== notes ===
The implementation contains a table that provides the mapping between the Micasa upnp actions and the Pioneer command.  This allows for easy customization if needed.

=== KNOWN COMPATIBLE LIST: ===
VSX-1021[[BR]]
VSX-1120[[BR]]

=== SUSPECTED COMPATIBLE LIST: ===
VSX-1026[[BR]]
VSX-926[[BR]]
VSX-921[[BR]]