Changes between Version 4 and Version 5 of Installation-UI4

Timestamp:

2012-02-18 22:39:16 (13 years ago)

Author:

guessed

Comment:

Move to Version 0.3, support for SQBlaster Plus devices...

Installation-UI4

@@ -1 +1 @@
 = Installation =
  1. Download the following files from Source Control:
-   * export:tags/0.1/I_SQBlaster1.xml
-   * export:tags/0.1/D_SQBlaster1.xml
-   * export:tags/0.1/D_SQBlaster1.json
- 1. Goto ''MiOS developers'' --> ''Luup files''
- 1. Click the '''(Browse)''' buttons on the bottom, and enter the 3 filenames references above.
- 1. Select the checkbox "''[x] Restart Luup after upload''" and click '''(Go)'''
- 1. ... wait whilst it uploads and restarts the Lua engine ...
- 1. If successful, you'll see the 3x files listed in the System (using the exact names listed above).
- 1. Navigate to the ''Create device'' tab
- 1. For the ''!UpnpDevFilename'' field, type "`D_SQBlaster1.xml`".
- 1. For the ''!UpnpImplFilename'' field, type "`I_SQBlaster1.xml`".
- 1. For the ''Description'' field, type "IR Blaster - Room".
- 1. Click '''(Create device)''' button
- 1. Close this Dialog and click '''(Save)'''
+   * export:tags/0.3/I_SQBlaster1.xml
+   * export:tags/0.3/D_SQBlaster1.xml
+   * export:tags/0.3/D_SQBlaster1.json
+ 1. Follow the [http://wiki.micasaverde.com/index.php/Install_LUUP_Plugins Generic Plugin instructions] using "`D_SQBlaster1.xml`", and a Description of "IR Blaster - Room".
  1. At this point you are readying to attach the IP Address of the SQBlaster.
  1. Open the Wrench (or Spanner!) on your new "IR Blaster - Room" device.
@@ -20 +10 @@
  1. Enter a value for the ''ip'' field to match the address of your Network attached SQBlaster Device.  In the example, I'm connecting to `192.168.5.45`.  This will be different for your installation.
  1. Dismiss this Dialog and Press '''(Save)'''
+ 1. If using a ''SQBlaster Plus'' Device, perform the '''(Save)''' operation a second time to see the extra ''IR Transmitter'' devices appear.