Changes between Version 1 and Version 2 of InstallationController-UI4


Ignore:
Timestamp:
2011-04-10 03:19:30 (14 years ago)
Author:
guessed
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • InstallationController-UI4

    v1 v2  
    2424 1. Close this Dialog and click '''(Save)''' 
    2525 
    26 == Install SQRemote Configuration Files == 
    27  1. At this point you are ready to upload your SQRemote configuration files. 
     26== Extract Configuration Files from SQRemote == 
     27 1. Backup your SQRemote configuration to Box.net 
     28 1. Download the Backup file from Box.net, and open it. 
     29 1. Extract each file called "`devnnnnnnnn.xml`" 
     30 1. Extract the file called "`PackageDevices.xml`" 
     31 
     32== Install Configuration Files into Vera == 
     33 1. Goto ''MiOS developers'' --> ''Luup files'' 
     34 1. Click the '''(Browse)''' buttons on the bottom, and enter the filenames extracted above. 
     35 1. Select the checkbox "''[x] Restart Luup after upload''" and click '''(Go)''' 
     36 1. ... wait whilst it uploads and restarts the Lua engine ... 
     37 1. If successful, you'll see the filenames listed in the System (using the exact names extracted above). 
    2838 
    2939== Configure the SQBlaster IP Addresses == 
    3040The setup above creates SQBlaster devices, one for each registered with SQRemote.  These need to be configured with IP Addresses before they can function. 
    3141 
    32  1. Open the Wrench (or Spanner!) on your new "SQBlaster sq-blaster-xxxx.localIR Blaster" device. 
     42 1. Open the Wrench (or Spanner!) on your new "''SQBlaster sq-blaster-xxxx.local''" device. 
    3343 1. Select the '''[Advanced]''' Tab 
    3444 1. Enter a value for the ''ip'' field to match the address of your Network attached SQBlaster Device.  In the example, I'm connecting to `192.168.5.45`.  This will be different for your installation.