Changes between Version 28 and Version 29 of WikiStart

WikiStart

-                      v28
+                      v29
 . If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below.
-. If you still can't connect, try enabling remote access via the Connected By TCP / Greenwave mobile app.  One user has reported that this seemed to make things work.
 __Auto-Discovery__
 …
 If auto-discovery doesn't work for you, then you can manually specify an IP address by updating the advanced properties of main TCP Lighting gateway device (click the wrench icon, go to the ''Advanced tab'', and enter the gateway's IP address in the ''IP'' field).  You may need to check the DHCP client table of your home router to find the IP address of the gateway.  Another way of getting the IP address is to open a command window on a PC that is on the same network as the lighting gateway, enter the command '''ping lighting''' and note the IP address that the lighting host name resolves to.
+If you still can't connect, try enabling remote access via the Connected By TCP / Greenwave mobile app.  One user has reported that this seemed to make things work.
 __v1.0 Release Notes:__