Changes between Version 32 and Version 33 of WikiStart


Ignore:
Timestamp:
2015-02-16 02:04:25 (10 years ago)
Author:
pmnb
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WikiStart

    v32 v33  
    99Set up your ''Connected By TCP'' LED gateway and bulbs as per the instructions provided with the devices.  Ensure that everything is working (i.e. lights can be controlled using the smartphone apps or gateway web interface) prior to installing the plugin.  The Vera and TCP gateway Ethernet cables should be plugged into the same router/access point/hub, so as to ensure that the Vera can reach the TCP hub from a TCP/IP connectivity perspective. 
    1010 
    11 __Installation (UI5)__ 
     11__Installation (Marketplace/UI5)__ 
     12 
     13'''Note:''' The v2.0 plugin that supports TCP gateway version 3.0.74 and later is pending approval for release on the [http://apps.mios.com MiOS app marketplace].  In the meantime, please follow the manual installation instructions in the next section. 
     14 
    12151. Install the [http://apps.mios.com/plugin.php?id=6176 TCPLighting app] from the MiOS App Marketplace (i.e. the ''Apps / Install Apps'' page). 
    1316 
    14172. Wait for the Luup restart to complete. 
    1518 
    16 3. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.   It will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
     193. Go into the TCPLighting device configuration UI (wrench icon). You should see a "Pair" button - but don't click it yet ;-)  
    1720 
    18 4. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
     214. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
     22 
     235. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
     24 
     256. Press the green sync button on your Connected by TCP gateway. 
     26 
     277. Click the "Pair" button on the TCP Lighting config UI. Wait a few seconds.  If the pairing is successful, the plugin will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
     28 
     29__Installation (Manual Version 2.0 Installation/UI5)__ 
     30 
     31'''Note:''' Only use this version if your Connected By TCP gateway is running firmware version 3.0.74 or later. 
     32 
     331. Download the [http://code.mios.com/trac/mios_tcplighting/raw-attachment/wiki/WikiStart/TCPLighting%20Plugin%20v1.0.1.zip TCPLighting Plugin 2.0] zip file attached below. 
     34 
     352. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page. Make sure to click the "Restart Luup after upload" checkbox 
     36 
     373. Wait for the Luup restart to complete. 
     38 
     394. Go into the TCPLighting device configuration UI (wrench icon). You should see a "Pair" button - but don't click it yet ;-)  
     40 
     415. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
     42 
     436. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
     44 
     457. Press the green sync button on your Connected by TCP gateway. 
     46 
     478. Click the "Pair" button on the TCP Lighting config UI. Wait a few seconds.  If the pairing is successful, the plugin will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
    1948 
    2049__Auto-Discovery__