Changes between Version 36 and Version 37 of WikiStart


Ignore:
Timestamp:
2015-02-18 03:47:50 (10 years ago)
Author:
pmnb
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WikiStart

    v36 v37  
    1111__Installation (Marketplace/UI5)__ 
    1212 
    13 '''Note:''' The v2.0 plugin that supports TCP gateway version 3.0.74 and later is pending approval for release on the [http://apps.mios.com MiOS app marketplace].  In the meantime, please follow the manual installation instructions in the next section. 
     13'''Note:''' Only use this version if your Connected By TCP gateway is running firmware version 3.0.74 or later. 
    1414 
    15151. Install the [http://apps.mios.com/plugin.php?id=6176 TCPLighting app] from the MiOS App Marketplace (i.e. the ''Apps / Install Apps'' page). 
    … …  
    27277. Click the "Pair" button on the TCP Lighting config UI. Wait a few seconds.  If the pairing is successful, the plugin will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
    2828 
    29 __Manual Installation of Version 2.0 (UI5)__ 
    30  
    31 '''Note:''' Only use this version if your Connected By TCP gateway is running firmware version 3.0.74 or later. 
    32  
    33 1. Download the [http://code.mios.com/trac/mios_tcplighting/raw-attachment/wiki/WikiStart/TCPLighting%20Plugin%20v2.0.zip TCPLighting Plugin 2.0] zip file attached below. 
    34  
    35 2. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page. Make sure to click the "Restart Luup after upload" checkbox 
    36  
    37 3. Wait for the Luup restart to complete. 
    38  
    39 4. Go into the TCPLighting device configuration UI (wrench icon). You should see a "Pair" button - but don't click it yet ;-)  
    40  
    41 5. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
    42  
    43 6. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
    44  
    45 7. Press the green sync button on your Connected by TCP gateway. 
    46  
    47 8. Click the "Pair" button on the TCP Lighting config UI. Wait a few seconds.  If the pairing is successful, the plugin will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
    48  
    49 __Manual Installation of Version 1.0.1 (UI5)__ 
    50  
    51 '''Note:''' Only use this version if your Connected By TCP gateway is running a firmware version ''prior to'' 3.0.74. 
    52  
    53 1. Download the [http://code.mios.com/trac/mios_tcplighting/raw-attachment/wiki/WikiStart/TCPLighting%20Plugin%20v1.0.1.zip TCPLighting Plugin 1.0.1] zip file attached below. 
    54  
    55 2. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page. Make sure to click the "Restart Luup after upload" checkbox 
    56  
    57 3. Wait for the Luup restart to complete. 
    58  
    59 4. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
    60  
    61 5. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
    6229 
    6330__Auto-Discovery__ 
    … …  
    11481* Energy metering (maybe). 
    11582 
     83__Manual Installation of Version 2.0 (UI5)__ 
     84 
     85'''Note:''' Only use this version if your Connected By TCP gateway is running firmware version 3.0.74 or later. 
     86 
     871. Download the [http://code.mios.com/trac/mios_tcplighting/raw-attachment/wiki/WikiStart/TCPLighting%20Plugin%20v2.0.zip TCPLighting Plugin 2.0] zip file attached below. 
     88 
     892. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page. Make sure to click the "Restart Luup after upload" checkbox 
     90 
     913. Wait for the Luup restart to complete. 
     92 
     934. Go into the TCPLighting device configuration UI (wrench icon). You should see a "Pair" button - but don't click it yet ;-)  
     94 
     955. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
     96 
     976. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
     98 
     997. Press the green sync button on your Connected by TCP gateway. 
     100 
     1018. Click the "Pair" button on the TCP Lighting config UI. Wait a few seconds.  If the pairing is successful, the plugin will then poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  
     102 
     103__Manual Installation of Version 1.0.1 (UI5)__ 
     104 
     105'''Note:''' Only use this version if your Connected By TCP gateway is running a firmware version ''prior to'' 3.0.74. 
     106 
     1071. Download the [http://code.mios.com/trac/mios_tcplighting/raw-attachment/wiki/WikiStart/TCPLighting%20Plugin%20v1.0.1.zip TCPLighting Plugin 1.0.1] zip file attached below. 
     108 
     1092. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page. Make sure to click the "Restart Luup after upload" checkbox 
     110 
     1113. Wait for the Luup restart to complete. 
     112 
     1134. If you are lucky, the auto-discovery feature will have detected the ''Connected By TCP'' gateway and configured its IP address.    
     114 
     1155. If the auto-discovery failed, you will see the message ''No gateway IP address specified, autodiscovery failed'' in the gateway device UI.  Some of the reasons why this might happen, and how to manually configure the gateway IP address, are outlined in the Auto-Discovery section below. 
     116 
    116117__Acknowledgements__ 
    117118