= TCPLighting =

This plugin integrates a [http://www.tcpi.com/connected-by-tcp Connected By TCP] LED lighting gateway with a Vera controller.   Once a device for the gateway is created, the plugin in turn creates child devices (of type ''Dimming'' or ''SwitchPower'', as appropriate) for each connected bulb.  Since the bulbs are created as standard devices, they are available for control via scenes, mobile apps, etc.

__Installation (UI5)__
1. Download and unzip the attached zip file.
2. Upload all of the plugin XML, JSON and LUA files using the ''Apps / Develop Apps / Luup files'' page.  Make sure to click the ''Restart Luup after upload'' checkbox.
3. Wait for the Luup restart to complete.
4. Once the upload and Luup restart are completed, use the ''Apps / Develop Apps /  Create Device'' page to create a new device for the gateway.  Enter '''D_TCPLighting1.xml''' in the ''Upnp Device Filename'' field and the IP of your gateway in the ''IP'' field. You may need to check the DHCP client table of your home router to find the IP address of the gateway.  Another way of getting the IP address is to open a command window on a PC that is on the same network as the lighting gateway, enter the command '''ping lighting''' and note the IP address that the lighting host name resolves to.
5. Wait for the Luup restart to complete.
6. Refresh the Vera UI for good measure.
7. When the gateway device is initialized, it will poll the gateway and create child devices for each bulb.  If a bulb's room name matches that of a Vera room, it will be automatically added to the room.  Note that the device UI for the bulbs is often partially rendered when first created.  A browser refresh normally fixes this.

__Release Notes:__
* Many thanks to [http://forum.micasaverde.com/index.php?action=profile;u=93494 ctguess] for his post regarding how to control these bulbs.
* This is my first attempt at a Vera plugin, so please do not hesitate to provide constructive criticism.
* This is an unsupported hobbyist project.  I am in no way connected with [http://www.tcpi.com/ TCP] (the makers of the Connected By TCP gateway and bulbs) or [http://getvera.com/ Vera Control, Ltd].  Please do not ask them for support with this plugin.
* Code is based on an undocumented HTTP API.
* Only tested on a Veralite with UI5.
* Only tested with A19 dimmable bulbs.
* Default polling interval is 60 seconds. Therefore, any changes made outside of the Vera environment (using a remote or the ''Connected By TCP / Greenwave Reality'' apps) may take up to 60 seconds to be reflected in the Vera UI.  Ditto for new bulbs.

__To-Do:__
* Store code in [http://code.mios.com/trac/mios_tcplighting/browser code.mios.com] SVN repository. [Done]
* Gateway auto-discovery via SSDP.
* Additional gateway and light variables settings.
* Testing with multiple gateways.
* Energy metering (maybe).