Changes between Version 4 and Version 5 of WikiStart

Timestamp:

2013-02-18 21:12:40 (12 years ago)

Author:

nlrb

Comment:

Added muting of sirens

WikiStart

@@ -21 +21 @@
    * display event log
    * bypass sensors
+   * mute sirens
    * sync time
    * switch/dim X10 devices
@@ -124 +125 @@
  * X10 devices - Normally will become a switch, unless 'X10 dimmable' for the device is checked as well.
  * Keypads (1-way or 2-way) - Will be automatically added if present, but have no function at this point.
- * Sirens - The siren will show if a siren is active or not. A siren can only be turned off by disarming the partition. Note that sirens currently only work with [http://wiki.micasaverde.com/index.php/Release_Notes beta firmware] from MCV.
+ * Sirens - The siren will show if a siren is active or not. If one is active it can be muted by pressing the Off button. Muting one siren will mute all sirens (also the panel internal one). Note that sirens currently only work with [http://wiki.micasaverde.com/index.php/Release_Notes beta firmware] from MCV.
 
 In Powerlink Mode with Auto-config on, the configuration of devices is done automatically and the information cannot be edited. Whether an X10 device is dimmable or not can always be adjusted.