Changes between Version 7 and Version 8 of WikiStart_old

Timestamp:

2011-08-28 22:55:31 (13 years ago)

Author:

utz

Comment:

--

WikiStart_old

@@ -15 +15 @@
  * Sensors: Fire Detector, Flood Detector, ...
  * Functions: display/decode all possible events, read eventlog, handle alarms 
- * Specials: allow sending X10 commands via Vera, make keyfob buttons available in vera  
+ * Specials: allow sending X10 commands via Vera, make keyfob buttons available in Vera  
+ * Use the Common Alarm Panel Plugin Files
 
 == Installation ==
@@ -26 +27 @@
 Howto:
  * Attach the RS232 Interface to the Powermax.
- * Connect the RS232 Interface to the !USB/Serial and that to Vera.
- * Upload the plugin files; create a device using the files and explain the device to use the !USB/Serial port
+ * Connect the RS232 Interface to the USB/Serial and that to Vera.
+ * Upload the plugin files; create a device using the files and explain the device to use the USB/Serial port
  * In the Powermax device advanced control tab specify the Powermax zones you would like to have in Vera in the variable altid in form of "Z01,Z02,Z03,Z11". After reload zone devices should become visible.
  * Enter the installer mode on the Powermax panel. Go to the menu where you define a Powerlink device. Activate the Powerlink device. This should trick Powermax into believing it is talking to a Powerlink (but it is Vera).
@@ -40 +41 @@
  * Protocol Discussion: [http://www.domoticaforum.eu/viewtopic.php?f=68&t=6517]
 
+== Screenshots == 
 
+After installation you should find one device called "Powermax" and a number of Zone devices called "ZXX (Powermax)" 
+
+
+