= Honeywell Ademco Vista Alarm Panels Plugin via AD2USB =
Plugin for basic integration with the Honeywell Ademco Vista panels via the AD2USB keypad emulator.

=== Current Version ===
2.2

=== Compatible Products ===
All the Honeywell Ademco Vista alarm panels that AD2USB supports.
'''NOTE:''' This plugin uses the '''GOTO''' command to switch between partitions when more than one partition is used. If the panel doesn't support this command, the plugin won't work correctly for more than one partition. From what I've seen, the only panels with two or more partitions that don't support this command are the ''SE'' panels.

=== Installation ===
1. Download these files on your computer:
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/D_VistaAlarmPanel1.json | D_VistaAlarmPanel1.json]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/D_VistaAlarmPanel1.xml | D_VistaAlarmPanel1.xml]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/D_VistaAlarmPartition1.json | D_VistaAlarmPartition1.json]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/D_VistaAlarmPartition1.xml | D_VistaAlarmPartition1.xml]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/I_VistaAlarmPanel1.xml | I_VistaAlarmPanel1.xml]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/L_VistaAlarmPanel1.lua | L_VistaAlarmPanel1.lua]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/S_AlarmPartition2.xml | S_AlarmPartition2.xml]]
* [[http://code.mios.com/svn_public/mios_vista-alarm-panel-ad2usb/trunk/S_VistaAlarmPanel1.xml | S_VistaAlarmPanel1.xml]]

2. On the Vera dashboard, go to ''MiOS Developers'' -> '''Luup Files''' and upload all 8 files you downloaded.
3. If ''Restart Luup after upload'' is checked, uncheck it, then click ''GO''.
4. Go to '''Create Device'''; in the '''!UpnpDevFilename''' field enter ''D_VistaAlarmPanel1.xml'' and in the '''Description''' field enter ''Honeywell Ademco Vista'' (or any name you want). Press the ''Create Device'' button.
5. Restart Luup by clicking the curving arrows in upper right corner in the dashboard.
6. In the created device's control panel open the '''Advanced''' tab and enter the number of active partitions in the '''!NumPartitions''' input field. If this field doesn't exist, reload the web page.

'''Warning:''' The plugin might not work correctly if this number is incorrect.

7. Restart Luup. After restart a device for each partition is created.
8. In the partition's control panel, open the '''Advanced''' tab and in the '''!KeypadAddresses''' input field enter the addresses of the keypads assigned to this partition. If there are more than one keypad for a partition, enter the addresses of each keypad separated by a comma (e.g. If the keypads at addresses 17, 19 and 23 are assigned to this partition, the ''!KeypadAddresses'' will be ''17,19,23''). Repeat this for all the partition devices.

'''NOTE:''' If the ''!KeypadAddresses'' field doesn't exist, reload the web page.

'''WARNING''': The plugin won't work correctly if these variables aren't correctly set.

9. Restart Luup.
10. Assign and configure the serial port to the panel device: in the panel device's control panel, open the '''Settings''' tab, click on the '''I/O''' button to open the '''Serial Port configuration''' panel and select the serial port connected to the AD2USB. Set the ''Baud'' to '''115200'''.
11. Restart Luup.
12. Enjoy using the plugin. :)


=== Usage ===
==== On the dashboard ====
[[Image(dashboard.png)]]

Te panel device displays its version and the faulted zones. The partitions device display the current arming status. Here are the statuses' real equivalents:

||= Displayed status =||= Real status =||
|| Ready || DISARMED, READY TO ARM ||
|| !NotReady || DISARMED, with one or more FAULTED zones ||
|| Armed || AWAY ||
|| !ArmedInstant || MAXIMUM ||
|| Stay || STAY ||
|| !StayInstant || INSTANT ||
|| Night || NIGHT-STAY ||

==== The alarm panel device control panel ====
[[Image(cp_panel.png)]]

'''Clear Message''' clears the status messages generated by the plugin in the status box (upper-right corner of the dashboard).
[[BR]]
[[BR]]
[[BR]]
[[Image(cp_panel_adv.png)]]

In the '''Advanced''' tab there are two important variables: '''!DebugMode''' and '''!NumPartitions'''. 

'''!DebugMode''' is '''1''' (enabled) by default, which means that the plugin logs all the events. Setting this to '''0''' (disabled) will make the plugin log only the most important events, like errors.

'''!NumPartitions''' is the number of partitions, which is '''1''' by default. The plugin may crash if this number is incorrect.

==== The partition device control panel ====
[[Image(cp_partition.png)]]

To bypass a zone enter the zone number in the '''Bypass Zones''' input box. To bypass several zones, enter the zone numbers separated by a comma. To bypass all the zones leave the box empty or enter ''all''.

'''Chime Mode''' activates or deactivates chime mode for the current partition. The button will turn green if it's active.

=== Notes ===
* '''ALL''' the partition actions require the correct PIN code. The reason for this is that the plugin doesn't know what partition the AD2USB is assigned to, or even if it's assigned to any. So the plugin first executes a GOTO command, which requires the PIN code of the target partition.

* After performing an action using the PIN code, it is stored in an internal variable, and it will be used ONLY for getting the faulted zones.

=== Debugging ===
By default, the plugin logs only the important events, like alarms and errors. To enable verbose logging go to the ''Advanced'' tab in the panel device's Toolbox and set the ''!DebugMode'' to ''1'' then restart Luup.

'''How to see the logs:'''

You can find how to see the logs here:

http://wiki.micasaverde.com/index.php/Logs

It is recommended to look only for the log entries with levels ''01'' (errors) and ''50'' (Lua):
{{{
tail -f LuaUPnP.log | grep '^01\|^50'
}}}