Changes between Version 15 and Version 16 of WikiStart

Timestamp:

2013-01-14 14:53:40 (12 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ -11 +11 @@
 === UI4 ===
 
-1. Download this file: [http://code.mios.com/trac/mios_vistacam/export/10/tags/1.1/I_VistaCamMS.xml I_VistaCamMS.xml] and the attached '''D_DigitalSecurityCamera1.xml''' file.
+1. Download these files:
+ * [http://code.mios.com/trac/mios_vistacam/export/10/tags/1.1/I_VistaCamMS.xml I_VistaCamMS.xml]
+ * [http://code.mios.com/trac/mios_vistacam/raw-attachment/wiki/WikiStart/D_DigitalSecurityCamera1.xml D_DigitalSecurityCamera1.xml]
 2. Upload both files on Vera:
  1. On the Vera UI, in the ''Toolbox'' section, open ''MiOS Developers'' >> ''Luup Files''.
@@ -22 +24 @@
  3. Close the control panel.
 4. Save.
-5. Motion detection is '''disabled''' by default. To enable it open the ''Advanced'' tab of the camera device and scroll down to the ''State'' field. '0' means that it's disabled. To enable it set it to '1'.
+5. '''Motion detection is disabled by default.''' To enable it open the ''Advanced'' tab of the camera device and scroll down to the ''State'' field. ''0'' means that it's disabled. To enable it set it to ''1''.
 
 === UI5 ===
@@ -32 +34 @@
  3. Close the control panel.
 3. Save.
-4. Motion detection is '''disabled''' by default. To enable it open the ''Advanced'' tab of the camera device and scroll down to the ''State'' field. '0' means that it's disabled. To enable it set it to '1'.
+4. '''Motion detection is disabled by default.''' To enable it open the ''Advanced'' tab of the camera device and scroll down to the ''State'' field. ''0'' means that it's disabled. To enable it set it to ''1''.
 
 == Configuration ==