Changes between Version 27 and Version 28 of WikiStart


Ignore:
Timestamp:
2013-06-06 16:55:05 (11 years ago)
Author:
mcvflorin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • WikiStart

    v27 v28  
    1 = Motion Sensor Plugin for the !VistaCam SD = 
     1= Motion Sensor Plugin for the classic VistaCam = 
    22 
    3 This plugin adds support for the !VistaCam SD motion detection, creating a motion sensor that is tripped when the !VistaCam sends a 'motion detected' notification. 
     3This plugin adds motion detection support for the classic VistaCam, creating a motion sensor that is tripped when the VistaCam sends a 'motion detected' notification. 
    44 
    55== UI Compatibility == 
     
    2828=== UI5 === 
    2929 
    30 1. Install the !VistaCam Motion Sensor plugin. 
     301. Install the VistaCam Classic Motion Sensor plugin. 
    31312. On the Vera UI open the camera's control panel (click on the wrench). 
    32323. On the ''Advanced'' tab: 
     
    5050 
    5151* '''ERROR''': Missing Gateway IP address 
    52  * '''SOLUTION''': Enter the Vera IP address and port (or the URL if it's not in the same network as the camera) in the '''!GatewayAddress''' field in the camera's ''Advanced'' tab. (e.g. ''192.168.81.1'' or ''www.myserver.com/myvera'') 
     52 * '''SOLUTION''': Enter the Vera IP address and port (or the URL if it's not in the same network as the camera) in the '''GatewayAddress''' field in the camera's ''Advanced'' tab. (e.g. ''192.168.81.1'' or ''www.myserver.com/myvera'') 
    5353 
    5454* '''ERROR''': Failed to configure the camera.