Changes between Version 3 and Version 4 of WikiStart

Timestamp:

2012-06-30 20:51:16 (12 years ago)

Author:

docbliny

Comment:

--

WikiStart

@@ -3 +3 @@
 
 The Yamaha Receiver Plug-In for Vera allows you to remotely control several receivers models from your Vera dashboard. Your receiver must be connected to your network using an Ethernet-to-serial (RS232) adapter. The plug-in supports around 200 discrete commands and makes various status information items available to Vera (not all commands are exposed in the user interface).
+
+== Screenshot ==
+[[Image(Screenshot.PNG, 300px)]]
 
 == Requirements ==
@@ -30 +33 @@
 1. In the '''!UpnpDevFilename''' field, type `D_YamahaReceiver1.xml`.
 1. In the '''!UpnpImplFilename''' field, type `I_YamahaReceiver1.xml`.
-1. Enter the IP address of your Ethernet-to-serial adapter connected to the receiver.
+1. Enter the IP address and port of your Ethernet-to-serial adapter connected to the receiver. Use the format `192.167.0.123:6001` where the port is specified after the colon. If no port is specified, the plugin will attempt to use port 6001.
 1. Choose the room your receiver is in.
 1. Click ''Create device''.