| Version 2 (modified by mcvflorin, 13 years ago) (diff) |
|---|
DSC Alarm Panels Plugin
Setup
IT-100 connected to Vera using an USB-to-RS232 converter
- Go to MiOS developers -> Serial port configuration.
- Set the Baud to 9600.
- Select the alarm panel device from the Used by device drop-down list.
- Optionally you can give a name to this serial port in the Name field.
- Save.
- After Luup has restarted reload the web page.
IT-100 connected to Vera using a WIZnet or Roving Networks IP-to-Serial adapter
- Open the alarm panel device control panel -> Advanced tab. In the ip input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is 192.168.8.164 and it is connected on port 5000, the ip value should be 192.168.8.164:5000)
- Save.
- After Luup has restarted reload the web page.
Attachments
- ui5_ip_config.png (24.9 KB) - added by mcvflorin 13 years ago.
- ui5_serial_port_config.png (21.6 KB) - added by mcvflorin 13 years ago.
