| Version 1 (modified by mcvflorin, 13 years ago) (diff) |
|---|
Elk M1 Alarm Panels Plugin
Installation & Setup
- Download these files on your computer:
- On the Vera dashboard, go to MiOS Developers -> Luup Files and upload all 8 files you downloaded.
- If Restart Luup after upload is checked, uncheck it, then click GO.
- Go to Create Device; in the UpnpDevFilename field enter D_ElkAlarmPanel1.xml and in the Description field enter Elk M1 Alarm Panel (or any name you want). Press the Create Device button.
NOTE: If the panel is connected to Vera on the Ethernet port (using Elk M1XEP or an RS232-to-Ethernet adapter), enter the IP address and port in the IpAddress field (e.g. 192.168.8.23:5000).
- Restart Luup by clicking the curving arrows in the upper right corner in the dashboard.
- After Luup has restarted, reload the web page. (best use <Ctrl + F5> to do so)
Setup
If the panel has been connected to Vera on an USB port, you must configure the serial port.
- Go to MiOS developers -> Serial port configuration.
- Set the Baud to 115200.
- Select the newly created panel device from the Used by device drop-down list.
- Optionally you can give a name to this serial port in the Name field.
- Close this window and click SAVE.
- After Luup has restarted reload the web page.
Attachments
- serial_port_configuration.png (31.4 KB) - added by mcvflorin 13 years ago.
