Changes between Version 3 and Version 4 of UI5

Timestamp:

2011-10-20 14:40:42 (13 years ago)

Author:

mcvflorin

Comment:

--

UI5

@@ -2 +2 @@
 
 == Setup ==
-=== Panel connected to Vera on an '''USB''' port ===
+=== Panel connected to Vera on '''USB''' port ===
 1. Go to '''MiOS developers''' -> '''Serial port configuration'''.
  * Set the '''Baud''' to ''115200''.
@@ -11 +11 @@
 [[Image(ui5_serial_port_config.png)]]
 
-=== Panel connected to Vera on the '''Ethernet''' port (using '''Elk M1XEP''' or an RS232-to-Ethernet adapter) ===
+=== Panel connected to Vera on '''Ethernet''' port (using '''Elk M1XEP''' or an RS232-to-Ethernet adapter) ===
 1. Open the alarm panel device control panel -> '''Advanced''' tab. In the '''ip''' input field enter the IP address of the Ethernet adapter and the port on which it is connected. (e.g. if the IP address of the Ethernet adapter is ''192.168.8.164'' and it is connected on port ''5000'', the '''ip''' value should be ''192.168.8.164:5000'')
 2. Save.