Changes between Version 2 and Version 3 of Wiki Start


Ignore:
Timestamp:
2011-06-23 18:41:58 (13 years ago)
Author:
mcvflorin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Wiki Start

    v2 v3  
    99* M1 M1EZ8 with ELK-M1EZ8MSI Main Serial Port Interface 
    1010 
    11 === Usage Notes === 
     11=== Notes === 
    1212* Arming or Bypassing zones requires the PIN code. 
    1313* Arming or Disarming a partition also requires the PIN code. 
    1414 
    15 === Screenshots === 
    16 N/A 
     15=== Usage === 
     16[[Image(panel_dashboard.png)]] 
     17 
     18Pressing the ''Clear Message'' button clears the status message displayed in the upper right corner of the dashboard. 
     19 
     20[[Image(partition_dashboard.png)]] 
     21 
     22The status displayed is the current arm mode. 
     23 
     24[[Image(partition_toolbox.png)]] 
     25 
     26The status displayed is the current arm mode. 
     27 
     28The Elk M1 alarm panel requires the user code to arm/disarm a partition or to bypass/unbypass a zone. Enter the user code in the ''PIN Code'' field then click ''Store''. The user code is stored securely and can't be accessed by anyone. It is NOT stored in a state variable to be visible by anyone with access to the Vera. This also means that the user code is lost when the Luup engine restarts and it needs to be entered again. 
     29 
     30Pressing the ''Clear'' button erases the user code from memory. 
     31 
     32It's not necessary to store the user code to arm/disarm a partition, but it must be present in the ''PIN Code'' field.