Changes between Version 5 and Version 6 of WikiStart

Timestamp:

2011-11-20 11:31:02 (12 years ago)

Author:

evanes

Comment:

--

WikiStart

@@ -13 +13 @@
 I use an older product from RFXCOM which is a LAN interface which has 2 ports, one for a receiver and one for the transmitter. This immediately poses a problem for the vera device characteristics due to the nature of a luup device having only one communication port. In a luup implementation file events are raised when data arrives. Because of this the read port of RFXCOM is the default port. For any sending that needs to be done a scoket connection is made.
 
-== Setup device ==
+== Setup gateway device ==
 
 Use create device on the developer button. Now select D_RFXCOM.xml and enter the ipaddress of the device. The default configuration uses the 10001 port for reading with the device and the 100002 for writing.
@@ -19 +19 @@
 Click create and vera will reset leaving a new RFXCOM device. When a message is received it should show on the device.
 [[Image(rfxcom_device.png)]]
+
+== Configure Klik Aan Klik Uit (KAKU) ==
+
+some new text needs to be added here
+
+== Configure Homeeasy device ==
+
+some new text needs to be added here
+
+== Configure Visonic device ==
+
+some new text need to be added here
 
 == Configure Harrison Curtain ==