Last modified 13 years ago Last modified on 2012-02-18 22:39:16

Installation

  1. Download the following files from Source Control:
  2. Follow the ​Generic Plugin instructions using "D_SQBlaster1.xml", and a Description of "IR Blaster - Room".
  3. At this point you are readying to attach the IP Address of the SQBlaster.
  4. Open the Wrench (or Spanner!) on your new "IR Blaster - Room" device.
  5. Select the [Advanced] Tab
  6. Enter a value for the ip field to match the address of your Network attached SQBlaster Device. In the example, I'm connecting to 192.168.5.45. This will be different for your installation.
  7. Dismiss this Dialog and Press (Save)
  8. If using a SQBlaster Plus Device, perform the (Save) operation a second time to see the extra IR Transmitter devices appear.