Installation
- Download the following files from Source Control:
- Goto MiOS developers --> Luup files
- Click the (Browse) buttons on the bottom, and enter the 3 filenames references above.
- Select the checkbox "[x] Restart Luup after upload" and click (Go)
- ... wait whilst it uploads and restarts the Lua engine ...
- If successful, you'll see the 3x files listed in the System (using the exact names listed above).
- Navigate to the Create device tab
- For the UpnpDevFilename field, type "D_SQBlaster1.xml".
- For the UpnpImplFilename field, type "I_SQBlaster1.xml".
- For the Description field, type "IR Blaster - Room".
- Click (Create device) button
- Close this Dialog and click (Save)
- At this point you are readying to attach the IP Address of the SQBlaster.
- Open the Wrench (or Spanner!) on your new "IR Blaster - Room" device.
- Select the [Advanced] Tab
- Enter a value for the ip field to match the address of your Network attached SQBlaster Device. In the example, I'm connecting to 192.168.5.45. This will be different for your installation.
- Dismiss this Dialog and Press (Save)
Download in other formats:
