Changes between Version 11 and Version 12 of WikiStart

Timestamp:

2011-09-15 18:55:00 (13 years ago)

Author:

mcvflorin

Comment:

--

WikiStart

@@ -3 +3 @@
 
 === Current Version ===
-2.0 Beta
+2.2
 
 === Compatible Products ===
@@ -23 +23 @@
 4. Go to ''Create Device''; in the ''!UpnpDevFilename'' field enter ''D_VistaAlarmPanel1.xml'' and in the ''Description'' field enter ''Honeywell Ademco Vista'' (or any name you want). Press the ''Create Device'' button.
 5. Restart Luup by clicking the curving arrows in upper right corner in the dashboard.
-6. After Luup has restarted, reload the web page. (best use <Ctrl + F5> to do so)
+6. After Luup has restarted, reload the web page.
+7. In the created device's control panel open the ''Advanced'' tab and enter the number of active partitions in the '''NumPartitions''' input field. The plugin might not work correctly if this number is incorrect.
+8. Restart Luup. After restart a device for each partition is created.
+9. In the partition's control panel, open the ''Advanced'' tab and in the '''KeypadAddresses''' input field enter the addresses of the keypads this partitions is associated with. If there are more than one keypad for a partition, enter the addresses of each keypad separated by a comma(,). Repeat this for all the partition devices. The plugin won't work correctly if these variables aren't correctly set.
+10. Restart Luup.
+11. Assign and configure the serial port to the panel device: in the panel device's control panel, open the '''Settings''' tab, click on the '''I/O''' button to open the '''Serial Port configuration''' panel and select the serial port connected to the AD2USB.
+12. Restart Luup.
+13. Enjoy using the plugin. :)
+
 
 === Usage ===